Saturday, August 14, 2010

Ty la1000 lamp - How to Replace TY LA1000 Lamp - 7 Easy Steps

Ty la1000 lamp

Television (TV) is a traditional and widely used medium for communication. It is commercially available since the late 1930s. The television set has become a very important receiver of information in business or home.

When need to replace lamp?

The replacement of TY LA1000 lamp depends on the user itself. When the brightness of the screen become loss and will appeared dim, you need to think that it is the one the indicator that we need to replaced the TY LA1000 lamp.

Replacement procedure

First of all before you want to replace your TY LA1000 lamp, you need to turn power off. Take a time and wait until power indicator stops blinking red and then unplug the power cord from the wall outlet before removing your TY LA1000 lamp. Please make sure that the area around the TY LA1000 lamp unit has cooled down to avoid any unwanted accident. The best time to start replaced your TY LA1000 lamp is more than one hour after turn off.

Now you are ready to remove the front cover when the TY LA1000 lamp is cooled down. Place your fingertips under the Front cover and pull it from the projection display. This step is so easy but you need should be careful to avoid dangers or risk.

The next step is to loosen the cover screw by using the screwdriver. Turn the screwdriver anticlockwise to loosen the screw. Before the action begin you first need to read caution and warning labels on lamp cover. Then, loosen the lamp cover screw by using a screwdriver.

Loosen the lamp unit screw with a screwdriver. The next step is to grasp the lamp unit slowly to remove from the projection display. However please allow the lamp to cool before handling or replacing the lamp unit. You need to be caution. This is because the lamp unit is hot immediately after its use, touching it may cause burns.

Now is the time to install the new lamp unit. You should be careful of the insertion direction. Any misdirection will make your lamp can't be installed correctly and maybe not functional.

The replacement procedure nearly finished. Now you had replaced the new Lamp unit and the next step is to cover screws. Tighten the lamp unit/cover screw with a screwdriver. You can choose either to disposed the old lamp (proper procedure) or you can sell to someone who willing to buy second hand lamp to be repaired. Be caution that you need to attach the lamp unit and lamp unit housing door correctly. This is because if the lamp unit and lamp unit housing door are not attached correctly, the circuited will be activated and the result is you can't turn on the lamp.

Your new lamp has been replaced. Now you are need to reset the lamp time. Strictly follow the manufacturer leaflet. Now you are ready to enjoy with your new TV lamp. Take care of the lamp warranty form. You will need. The TV with high quality replacement lamp will provide you some great result and will enhance your relax moment with your family.Enjoy your life further with this technology.

How to choose the right TY LA1000 lamp

The first think that you need to consider before purchasing a lamp is its level of brightness. This is one of the biggest things that we need to take care of our action. When a light bulb is connected to the lamp will it give out a nice bright light, or will it be dim? Toshiba lamps are not recommended because it is found that the brightness level wasn't very high. The light appeared to be dim regardless of what bulb we screwed into the lamp. If you are looking for a brand that will light up the entire room, this is not the one to buy.

Another criterion is to look at the opening of the lamp.The good lamp should contain a large opening that the light bulb can be screwed into. This hole like structure should be large enough to fit a wide range of bulb sizes. In this case the Toshiba brand meets these criteria head on, and gives users a large assortment of bulb sizes to choose from to screw into the lamp.

Ty la1000 lamp

Article Source: